Sea Squirrel TGH Sherpa Forward Motor Mount and T-Case Kit

Turn your Element Stealth X Transmission into a Forward Motor and Divorced Transfer Case with this kit for the Team Garage Hack Holmes Hobbies Sherpa Chassis.

Based on the Recon G6 Certified GSpeed forward motor mount and transfer case for maximum durability.

Forward Motor is positioned to allow use of the popular offset axles or standard center pumpkin axles. 

Use the Stock Element Links or Axial Racing 10.2 Links (except for Steering and Panhard links) and Axles or other popular options.

2 Options:

• 12% Overdrive
• 24% Overdrive

Includes: Forward Motor Mount, Transfer Case, Transfer Case Input Shaft, Hardware, Instructions

NOTE:

1. If using the TGH Servo Mount, clearance may be needed for pinion gear.
2. Rear Link Rod Ends may touch transfer case, depending on which ones are used. Notch transfer case and file rod end to remove interference.

Additional items shown in pictures are not included in sale. They are shown for illustrative purposes only.

Required to Complete:

12% OD Version

• Team Garage Hack Holmes Hobbies Sherpa Rails
• Team Garage Hack Holmes Hobbies Sherpa Panhard Mount
• Element Sealth X Transmission - Standalone Kit or from Element Vehicle 
• Incision Slipper Eliminator (3 Gear Trans) (IRC00082)
• Element Stealth X Gearbox Spur Gear Hub (42023)
• Element Spur Gear 48P 87T (9654)
• Element Stealth X FT Stealth X Drive Gear Set, machined, (42032)
• Driveshaft from Offset Motor to Transfer Case
• 4 of 5x11x4mm Bearings
  
• 1 of Axial 18T Gear (AX31126)
• 1 of Axial 20T Gear (AX30394)
• 1 of 2x8mm Pin (AX30168)
• 1 of 1.5x8mm Pin (AX30161)
• 1 of Axial AX10 Motor Plate (AX30491) or equivalent
• Pinion Gear - Axial or Robinson Racing Recommended
• Motor and Electronics
• High Quality Grease for Gears
• Tools for assembly and modification

24% OD Version

• Team Garage Hack Holmes Hobbies Sherpa Chassis Rails
• Team Garage Hack Holmes Hobbies Sherpa Panhard Mount
• Element Sealth X Transmission - Standalone Kit or from Element Vehicle
• Incision Slipper Eliminator (3 Gear Trans) (IRC00082)
• Element Stealth X Gearbox Spur Gear Hub (42023)
• Element Spur Gear 48P 87T (9654)
• Element Stealth X FT Stealth X Drive Gear Set, machined, (42032)
• Stealth X Drive OD2 Gear Set Machined (EDR830x50)
• Driveshaft from Offset Motor to Transfer Case ***SDI Prop Shaft Available
• 4 of 5x11x4mm Bearings
• 1 of Axial 18T Gear (AX31126)
• 1 of Axial 22T Gear (AX30551)
• 2 of 2x8mm Pin (AX30168) (Included with 22T Gear)
• 1 of Axial AX10 Motor Plate (AX30491) or equivalent
• Pinion Gear - Axial or Robinson Racing Recommended
• Motor and Electronics
• High Quality Grease for Gears
• Tools for assembly and modification