
Element STD & IFS Forward Motor and T-Case Kit
Turn your Element and the Stealth X Transmission into a Forward Motor and Divorced Transfer Case with this kit. Works with the Element RC Vehicle (RTR or Kit) with the IFS (Independent Front Suspension) or standard straight axle.
Forward Motor is positioned to allow use of the popular offset axles or standard center pumpkin axles.
Use the Stock Element Links, Chassis, Skid Plate and Axles.
2 Options:
- 12% Overdrive
- 24% Overdrive
Includes: Forward Motor Mount, Element Chassis Adapter Plates, Transfer Case, Transfer Case Input Shaft, Hardware, Instructions
NOTE: 14T Pinion Gear recommended. 13T Pinion can be used but the front driveshaft will rub slightly, at full passenger-side compression, on some motors. Not all motors tested.
Additional items shown in pictures are not included in sale. They are shown for illustrative purposes only.
Required to Complete:
12% OD Version
- Element Stealth X Outdrives (42027)
- Element Stealth X FT Stealth X Drive Gear Set, machined, (42032)
- Driveshaft from Offset Motor to Transfer Case ***SDI Prop Shaft Available
- 4 of 10x15x4mm Bearings
- 4 of 5x11x4mm Bearings
- 1 of m4 Flange Nut
- 1 of Axial 18T Gear (AX31126)
- 1 of Axial 20T Gear (AX30394)
- 1 of 2x8mm Pin (AX30168)
- 1 of 1.5x8mm Pin (AX30161)
- 1 of Axial AX10 Motor Plate (AX30491) or equivalent
- 1 of 14T Pinion Gear - Incision or Robinson Racing Recommended
- 1 of Incision 56t 32p Spur Gear (IRC00402) or equivalent
- 1 of Incision Slipper Eliminator (3 Gear Trans) (IRC00082)
- Motor and Electronics
- High Quality Grease for Gears
- Tools for assembly and modification
24% OD Version
- Stealth X Drive OD2 Gear Set Machined (EDR830x50)
- Element Stealth X Outdrives (42027)
- Element Stealth X FT Stealth X Drive Gear Set, machined, (42032)
- Driveshaft from Offset Motor to Transfer Case ***SDI Prop Shaft Available
- 4 of 10x15x4mm Bearings
- 4 of 5x11x4mm Bearings
- 1 of m4 Flange Nut
- 1 of Axial 18T Gear (AX31126)
- 1 of Axial 22T Gear (AX30551)
- 1 of 2x8mm Pin (AX30168)
- 1 of 1.5x8mm Pin (AX30161)
- 1 of Axial AX10 Motor Plate (AX30491) or equivalent
- 1 of 14T Pinion Gear - Incision or Robinson Racing Recommended
- 1 of Incision 56t 32p Spur Gear (IRC00402) or equivalent
- 1 of Incision Slipper Eliminator (3 Gear Trans) (IRC00082)
- Motor and Electronics
- High Quality Grease for Gears
- Tools for assembly and modification